FAST SHIPPING
On Orders Over $99
EXPERT SUPPORT
⌕ TRACK ORDER 🛒 CART (0)

Need Help Matching a Part?

Tell us your brand, horsepower, and what the engine is doing. We can usually point you to the right ignition part fast.

(918) 457-4099
Available Mon-Fri 8am - 5pm CST
HomeOutboard IgnitionStator

Stator

Refine your search or browse the listings below.

Stator
CDI Electronics 174-2075K1 Stator for Force Outboards

CDI Electronics 174-2075K1 Stator for Force Outboards

PART #: 174-2075K1
(18)

174-2075K1 is an ignition stator built for 75 HP Force 1996-99 models with Serial # OE138600 thru OE369299 (9 amp charging system). Used to correct ignition power loss caused by a failing stator assembly.
Replaces OEM#: 398-832075A13, 398-832075A14, 398-9873A13
Not for use with flywheels having glued or bolted-in magnets

CDI Electronics 174-6231K2 Stator for Force Outboards

CDI Electronics 174-6231K2 Stator for Force Outboards

PART #: 174-6231K2
(20)

174-6231K2 is a replacement ignition stator used on 150 HP Force 1991 B, C, D, F and J models, 1992 A and C models and 1991-92 models with Serial # OE000001 thru OE009499. Provides the electrical source needed by the ignition system to fire properly.
Replaces OEM#: 398-6231A12, 398-6231A13, 398-6231A14, 398-6231A15
Can be used with inverter.

CDI Electronics 176-4796K1 Stator for Force Outboards

CDI Electronics 176-4796K1 Stator for Force Outboards

PART #: 176-4796K1
(17)

176-4796K1 is an ignition stator built for 150 HP Force 1991 B, C, D, F and J models, 1992 A and C models and 1991-92 models with Serial # OE000001 thru OE009499. Helps maintain stable spark energy across the operating range.
Replaces OEM#: 332-4796A7, 332-4796A8
This stator has the inverter built in and allows the original inverter to be removed and discarded.

CDI Electronics 174-3175 Stator for Mercury Outboards

CDI Electronics 174-3175 Stator for Mercury Outboards

PART #: 174-3175
(10)

Fits 50 HP 4cyl electric start Mercury/Mariner 1970-75 models with Serial # 2858814 thru 4357639: 174-3175 is an ignition stator. Restores dependable ignition charging output in demanding marine conditions.
Replaces OEM#: 333-3175
Replaces low side coil only. Strongly recommended to replace 174-3175 and 174-3176 at the same time.

CDI Electronics 174-3176 Stator for Mercury Outboards

CDI Electronics 174-3176 Stator for Mercury Outboards

PART #: 174-3176
(17)

174-3176 is an ignition stator for 50 HP 4cyl electric start Mercury/Mariner 1970-75 models with Serial # 2858814 thru 4357639. Generates ignition voltage needed for consistent spark delivery.
Replaces OEM#: 333-3176
Replaces high side coil only. Strongly recommended to replace 174-3175 and 174-3176 at the same time.

CDI Electronics 174-4793 Stator for Mercury Outboards

CDI Electronics 174-4793 Stator for Mercury Outboards

PART #: 174-4793
(8)

174-4793 is a replacement ignition stator used on 65 HP 4cyl Mercury/Mariner 1969-71 models with Serial # 2503993 thru 3293183. Restores dependable ignition charging output in demanding marine conditions.
Replaces OEM#: 398-3587, 398-3618, 398-4792, 398-4793, 398-5232

CDI Electronics 174-5454K1 Stator for Mercury Outboards

CDI Electronics 174-5454K1 Stator for Mercury Outboards

PART #: 174-5454K1
(21)

174-5454K1 fits 30 HP 4cyl Jet Mercury/Mariner 1989-97 models with Serial #OC159200 thru OG589999 as an ignition stator. Restores dependable ignition charging output in demanding marine conditions.
Replaces OEM#: 398-5454A21, 398-5454A22, 398-5454A24, 398-5454A25, 398-5454A26, 398-5454A42, 398-5454A56, 398-5454A62, 398-5454A63, 398-5704A2, 398-5704A4, 398-5704A5, 398-5704A7, 398-5919A2, 398-5919A3, 398-5919A6, 398-5919A7, 398-5919A8, 398-5919A10, 398-818535A15
Not for use with flywheels having glued in magnets.

CDI Electronics 174-4469 Stator for Mercury Outboards

CDI Electronics 174-4469 Stator for Mercury Outboards

PART #: 174-4469
(8)

174-4469 is an ignition stator for 4 HP Mercury/Mariner 1972-75 models with Serial # 3296137 thru 4107219 and 1980-89 models with Serial # 5595532 thru OA855096. Helps restore spark when the original stator output becomes weak or unstable.
Replaces OEM#: 336-4467A1, 336-4469A1
Replaces low side coil only.

CDI Electronics 174-4470 Stator for Mercury Outboards

CDI Electronics 174-4470 Stator for Mercury Outboards

PART #: 174-4470
(9)

174-4470 fits 4 HP Mercury/Mariner 1972-75 models with Serial # 3296137 thru 4107219 and 1980-89 models with Serial # 5595532 thru OA855096 as an ignition stator. Supports steady ignition voltage during starting and running conditions.
Replaces OEM#: 336-4468A1, 336-4470A1
Replaces high side coil only.

CDI Electronics 174-4424 Stator for Mercury Outboards

CDI Electronics 174-4424 Stator for Mercury Outboards

PART #: 174-4424
(7)

Fits 40 HP 2cyl Mercury/Mariner 1970-71 models with Serial # 2874704 thru 3336237: 174-4424 is an ignition stator. Supports steady ignition voltage during starting and running conditions.
Replaces OEM#: 398-3873, 398-3663, 398-4204, 398-4423, 398-4424
Includes 154-6770 rectifier.

CDI Electronics 174-6617K1 Stator for Mercury Outboards

CDI Electronics 174-6617K1 Stator for Mercury Outboards

PART #: 174-6617K1
(26)

For 6 HP Mercury/Mariner 1986-96 models with Serial # OA197112 thru OG289100, 174-6617K1 is an ignition stator. Used to correct ignition power loss caused by a failing stator assembly.
Replaces OEM#: 88617A2, 88617A3, 86617A5, 86617A9, 86617A11, 86617A13, 86617A20

CDI Electronics 174-6120K1 Stator for Mercury Outboards

CDI Electronics 174-6120K1 Stator for Mercury Outboards

PART #: 174-6120K1
(35)

Fits 9.8 HP Mercury/Mariner 1974-85 models with Serial # 3795659 thru 6620196: 174-6120K1 is an ignition stator. Supports steady ignition voltage during starting and running conditions.
Replaces OEM#: 339-5312A1, 339-5313A1, 339-5589A1, 339-5590A1, 339-6119A1, 339-6120A1
Replacement coils only.

CDI Electronics 174-8778K1 Stator for Force Outboards

CDI Electronics 174-8778K1 Stator for Force Outboards

PART #: 174-8778K1
(7)

174-8778K1 fits 40 HP Force 1992 C models (9 amp charging system) as an ignition stator. Supports steady ignition voltage during starting and running conditions.
Replaces OEM#: 398-8778A6, 398-8778A10, 398-8778A16, 398-8778A17, 398-8778A18, 398-8778A21, 398-8778A22, 398-8778A23, 398-8778A24, 398-8778A25, 398-8778A26, 398-8778A27, 398-8778A28, 398-8778A29, 398-818535A3, 398-818535A5, 398-818535A8, 398-818535A9, 398-818535A10, 398-818535A13, 398-818535A14, 749095, F749095
Not for use with flywheels having bolted in magnets. Is compatiable with voltage regulator or rectifier

CDI Electronics 176-3095 Stator for Force Outboards

CDI Electronics 176-3095 Stator for Force Outboards

PART #: 176-3095
(22)

176-3095 is an ignition stator built for 50 HP Force 1984-87 A and C models, 1988 A, B, C and D models and 1989-92 all models. Helps maintain stable spark energy across the operating range.
Replaces OEM#: F653095, F653095-1, F653095-2, F653095-3, F658095, 663095, 663095-1, 663095-2, 663095-3, 663095-4, 694095, 694095-1, 694095-2, 695095, 695095-1, 695095-2, 721095, 721095-2, 722095, 300-663095, 300-663095-4, 300-888793, 300-F658095, 300-F694095-2, 300-F695095, 300-F721095-1, 300-F722095

CDI Electronics 174-2075K2 Stator for Force Outboards

CDI Electronics 174-2075K2 Stator for Force Outboards

PART #: 174-2075K2
(5)

174-2075K2 is a replacement ignition stator used on 40 HP Force 1996-99 models with Serial # OE138600 thru OE369299. (16 amp charging system). Provides the electrical source needed by the ignition system to fire properly.
Replaces OEM#: 398-832075A3, 398-832075A4, 398-832075A5, 398-832075A6, 398-832075A12, 398-832075A17, 398-832075A21, 398-9873A19, 398-9873A22, 398-9873A28

CDI Electronics 174-9710K1 Stator for Force Outboards

CDI Electronics 174-9710K1 Stator for Force Outboards

PART #: 174-9710K1
(34)

For 40 HP Force 1992-95 models with Serial # OE000001 thru OE138599. (16 amp charging system), 174-9710K1 is an ignition stator. Used to correct ignition power loss caused by a failing stator assembly.
Replaces OEM#: 398-9710A11, 398-9710A12, 398-9710A14, 398-9710A15, 398-9710A17, 398-9710A18, 398-9710A22, 398-9710A23, 398-9710A25, 398-9710A28, 398-9710A30, 398-9710A33, 398-9710A34, 398-9710A35, 398-9710A36, 398-9710A38, 398-9710A39, 398-9710A43, 398-9710A45, 398-9710A46, 398-9710A47, 398-9710A48, 398-9710A49, 398-9873A9, 398-9873A17, 398-9873A19, 398-9873A24, 398-9873A25, 398-9873A29, 398-9873A35, 398-818535A17, 398-818535A18, F747095
Not for use with flywheels having bolted in magnets.Not for use with rectifier, requires voltage regulator.

CDI Electronics 174-2386 Stator for Mercury Outboards

CDI Electronics 174-2386 Stator for Mercury Outboards

PART #: 174-2386
(24)

174-2386 is a replacement ignition stator used on 25 HP manual start 4 stroke Mercury/Mariner 1998-2005 models with Serial # OG590000 thru 1B344298. Supports steady ignition voltage during starting and running conditions.
Replaces OEM#: 398-852386A4, 398-852386T6

CDI Electronics 174-2387 Stator for Mercury Outboards

CDI Electronics 174-2387 Stator for Mercury Outboards

PART #: 174-2387
(21)

174-2387 is an ignition stator built for 25 HP electric start 4 stroke Mercury/Mariner 1998-2005 models with Serial # OG590000 thru 1B344298. Used to correct ignition power loss caused by a failing stator assembly.
Replaces OEM#: 398-852387A4, 398-852387T7

CDI Electronics 174-5456 Stator for Mercury Outboards

CDI Electronics 174-5456 Stator for Mercury Outboards

PART #: 174-5456
(8)

174-5456 fits 90 HP 6cyl Mercury/Mariner 1979-86 models with Serial # 5594657 thru OB110053 as an ignition stator. Provides the electrical source needed by the ignition system to fire properly.
Replaces OEM#: 398-5454A2, 398-5454A6, 398-5454A7, 398-5454A8, 398-5454A9, 398-5454A17, 398-5454A18, 398-5454A55

CDI Electronics 173-3672 Stator for Evinrude Outboards

CDI Electronics 173-3672 Stator for Evinrude Outboards

PART #: 173-3672
(11)

173-3672 is an ignition stator built for 85 HP Johnson/Evinrude 1978-83 models. Helps restore spark when the original stator output becomes weak or unstable.
Replaces OEM#: 581830, 581865, 581987, 582016, 582023, 582404, 582497, 582867, 583023, 583104, 583671, 583672

CDI Electronics 174-9610K2 Stator for Mercury Outboards

CDI Electronics 174-9610K2 Stator for Mercury Outboards

PART #: 174-9610K2
(33)

174-9610K2 is a replacement ignition stator used on 105 HP 6cyl Jet Mercury/Mariner 1992-2000 models with Serial # OD082000 thru OG760500. Provides the electrical source needed by the ignition system to fire properly.
Replaces OEM#: 398-9610A3, 398-9610A5, 398-9610A6, 398-9610A9, 398-9610A14, 398-9610A17, 398-9610A19, 398-9610A22, 398-9610A24, 398-9610A33

CDI Electronics 174-5456-16 Stator for Mercury Outboards

CDI Electronics 174-5456-16 Stator for Mercury Outboards

PART #: 174-5456-16
(18)

For 135 HP Mercury/Mariner 1985-88 models with Serial # OA904646 thru OC100860 and 1990-91 models with Serial # OC239553 thru OD081999, 174-5456-16 is an ignition stator. Generates ignition voltage needed for consistent spark delivery.
Replaces OEM#: 398-5454A11, 398-5454A15, 398-5454A16, 398-5454A30, 398-5454A31, 398-5454A32, 398-5454A34, 398-5454A35, 398-5454A36, 398-5454A61, 398-5454A64
Models with 16amp charging system.

CDI Electronics 174-9873-16 Stator for Mercury Outboards

CDI Electronics 174-9873-16 Stator for Mercury Outboards

PART #: 174-9873-16
(24)

174-9873-16 is an ignition stator for 175 HP XR2 Sport Jet Mercury/Mariner 1997-2005 models with Serial # OE151580 thru OE433133. Generates ignition voltage needed for consistent spark delivery.
Replaces OEM#: 398-9873A1, 398-9873A3, 398-9873A4, 398-9873A36, 398-9873A39

Having Ignition Problems?

Use these guides to narrow down common outboard ignition symptoms before ordering parts.